The Halogenerators I63, I77, and I83 are dry salt aerosol generators that are designed for the use in salt rooms, salt caves or salt chambers for prevention of allergies, asthma, bronchitis, dermatitis, colds, coughs etc.
They can be used in SPAs, hotels, schools, wellnes salons, gyms, nurseries, etc. The dry salt aerosol moves to the salt room in a constant flow. The activated salt particles of 1-10 microns size will reach the users, especially their mucous membranes and skin cells.
Halogenerator I63:
Advantages:
– It is recommended for use in salt rooms of any size from 4 sq.m. to 45sq.m. (6 cub.m. – 100 cub.m.)
– It has automatic settings depending on the room`s size
– It shows the approximate salt aerosol concentration in real time during the session
– The desirable salt aerosol concentration is automatically achieved taking into account the size of the salt room
– Salt aerosol consists mainly of particles within the range of 0.5-10 microns
– The generator can be installed on a wall outside or inside the salt room
– The outgoing stream of the salt aerosol is continuously visible thanks to the blue LED light
– It doesn’t have problems of corrosion because it is fully made from medical plastic
– High reliability, simplicity of service and low price
Technical information:
- Automatic dry salt aerosol generator
- 7 parameters can be inserted manually: salt aerosol activation intensity, salt aerosol concentration, session time (duration), airing time, mill speed, fan
speed, room size (in sq.m.).
- The desirable concentration of the salt aerosol is provided thanks to the regulation of the amount of salt, coming from the generator to the salt room
- The machine can be installed inside or outside the salt room
- The mechanical board consists of 3 easily replaceable blocks (feeder, mill, and fan)
- The electronic block contains a modern CPU and memory
- It consumes about 30 – 200 g of dry salt per 15 – 90 minutes session
- Provides 6 levels of salt therapy within the concentration range of 0,5 – 15 mg/cub.m.
- The electrical source: 230 – 220 V (AC); 110 V (AC), the working voltage is 12V (DC)
- Can control 3 outside circuits (periphery): lights and ventilators (less, than 900W)
- Power consumption without any periphery: less than 50W
- The dry salt-aerosol is continuously blown into the salt therapy room
- Height 500, width 350, depth 250 mm; weight 12 kg
Halogenerator I77:
Technical information:
- The control panel of the halogenerator consists of 3 buttons with colored signal lights
- Provides 6 different levels of dry salt aerosol concentration (salt therapy intensity levels)
- The stream of the salt aerosol is enlightened by a blue LED lamp
_ The optimum microclimate inside the salt room is guaranteed for following sizes and thanks to a unique method: 4-8 sq.m. (8-16 cub.m.); 9-15 sq.m. (18-30
cub.m.); 18-30 sq.m. (36-60 cub.m.)
- The session duration is usually fixed to 40 min, but shorter durations are also possible
- The duration of the salt room`s airing, which is compulsory before each session, is usually fixed to 10 min
- I77 consumes medical salt with 0.5 mm particles. The consumption of salt per session is about 70-250g, depending on salt therapy intensity level
- The halogenerator has a timer and 3 sockets of the periphery circuits for an automatic control of ventilators and lighting
- I77 consists of 3 easily replaceable blocks: feeder, mill, and fan, which are unified with other partss of plastic I-series halogenerators
- The generator can be installed on a wall outside of the salt room
- Power supply: 230V (AC); 110 V (AC), power is up to 50 W (without periphery) and up to 800 W with periphery.
- Dimensions: height 570mm; width 370mm; depth 200mm.
- Weight 12,0 kg.
Halogenerator I83:
Advantages:
– Adjusting the settings is extremely simple thanks to the big touch screen
– It is recommended for use in salt rooms of any size from 7 sq.m. to 45 sq.m. (12 cub.m. – 100 cub.m.)
– It shows the approximate salt aerosol concentration in real time during the session
– the desirable salt aerosol concentration is automatically achieved taking into account the size of the salt room
– Salt aerosol consists mainly of particles within the range of 0.5-10 microns
– The generator can be installed on a wall outside or inside the salt room
– The outgoing stream of the salt aerosol is continuously visible thanks to the blue LED light
– It doesn’t have problems of corrosion because it is fully made from medical plastic
– High reliability, simplicity of service and low price
Technical information:
- Touch screen control panel with detailed information
- The mechanical board consists of 3 easily replaceable blocks (feeder, mill, and fan)
- The electronic block contains a modern CPU and memory
- It consumes about 30 – 200 g of dry salt per 15 – 90 minutes session
- Provides 6 levels of salt therapy within the concentration range of 0,5 – 15 mg/cub.m.
- The electrical source: 230 – 220 V (AC); 110 V (AC), the working voltage is 12V (DC)
- Can control 3 outside circuits (periphery): lights and ventilators (less, than 900W)
- Power consumption without any periphery: less than 50W
- The dry salt-aerosol is continuously blown into the salt therapy room
- Height 500, width 350, depth 250 mm; weight 12,5 kg
