Titanium Heat exchanger SC-TI

SC-TI titanium pool heat exchangers are designed for use in salt water filtration systems.

They are designed for pools with salt electrolysis, seawater and all those with increased disinfection requirements. The titanium water-water heat exchanger is manufactured with extreme care, quality and precision of the welds. This high-quality heat exchanger has exceptional corrosion resistance even at high salt levels in the pool water and is suitable for seawater. These heat exchangers offer maximum energy efficiency with minimal pressure losses. Like all tube and shell heat exchangers, they are installed in the filtration water circuit, after the filter - directly or in a bypass.

In addition, thanks to the short path of the heated fluid (pool water), the heat exchanger has very low pressure losses. The corrugated tubes, in turn, increase turbulence, which enhances heat transfer. The titanium versions can also be used for salt water and salt electrolysis systems.

ADVANTAGES
• Corrugated tubes - create turbulent flow, which enhances heat transfer and reduces the formation of sediment and deposits
• Low pressure drop on the pool side - high flow rate with low pressure losses, eliminating the need for a bypass
• Airtight, welded construction
• Titanium construction - resistant to aggressive substances, such as salt, fluorine and chlorine
• Compact size

CONSTRUCTION
• corrugated tubes of diameter Ø 8 mm / 0.31 in
• welded unit built of titanium

WORKING PARAMETERS
Max. pressure: 16 bar / 232 psi
Max. temp.: 150°C / 302°F

Dimensions:

K1/K4: inlet / outlet heat source – external thread G 1 1/2" (SC-TI 2000 - G 2")
K3/K2: inlet / outlet pool water – internal thread G 1 1/2" (SC-TI 2000 - G 2")